Registering An Auto Document - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 161 Thursday, January 27, 2000 1:57 PM
D
Enter the function number for
"Register/Delete" with the num-
ber keys.
E
Enter the number for "Delete Pro-
gram" with the number keys.
Note
If "Delete Program" is not
shown, press [ Prev.] or [ Next].
F
Press the Quick Dial key contain-
ing the program you wish to de-
lete.
The contents of the program are
shown on the display.
Note
If you make a mistake, press
[No] and the correct key.
You can press [Status] to see the
status currently programmed.
Register/Delete Menu
G
Press [Yes].
Note
If you press [No], the program is
not deleted and the display
shown in step F appears again.
H
Press [Yes].
The program is deleted.
Note
If you press [No], the program is
not deleted and the display
shown in step F appears again.
I
Press the { { { { User Tools/Counter} } } } key.

Registering an Auto Document

If you find that you often have to send
a particular page to people (e.g., a
map, a standard attachment, or a set
of instructions), store that page in
memory as an Auto Document. This
saves re-scanning the original every
time you wish to send it.
7
161