Id Code - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 194 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools
G
Press [PrevMenu].
H
Press the { { { { User Tools/Counter} } } } key.

ID Code

Use this procedure to register the fol-
lowing kinds of ID codes.
Confidential ID
This ID is usually required for
printing a message received in the
Confidential Reception.
"Printing a Confidential Message"
Polling ID
This ID is required for using Trans-
fer Request (P.103 "Transfer Re-
quest"), Transfer Station (P.64
"Transfer Station"), Default ID Poll-
ing Transmission (P.96 "Polling
Transmission"), Default ID Polling
Reception (P.100 "Polling Recep-
tion"), ID Transmission (P.55 "ID
7
Transmission (Closed Network)"), ID
Reception (P.65 "ID Reception
(Closed Network)") functions.
Memory Lock ID
This ID is required for printing a
message received using Memory
Lock. P.122 "Printing a File Re-
ceived with Memory Lock"
Limitation
When you use Transfer Request,
Transfer Station, or ID Transmis-
sion, register the same ID code as
that registered on the sender's ma-
chine.
Note
A Polling ID can be any combina-
tion of digits (0 - 9) and letters (A -
F) except for 0000 and FFFF.
194
A Confidential ID and Memory
Lock ID can be any a four digit nu-
meric code except for 0000.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
P.120
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Key Op. Settings" with the num-
ber keys and press the { { { { #} } } } (Enter)
key within 3 seconds.