Deleting Groups - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 151 Thursday, January 27, 2000 1:57 PM

Deleting Groups

This function deletes all destinations
registered in a Group.
Limitation
When a registered Group is being
used for a Memory Transmission
on standby, the message "This des-
tination is in use for standby trans-
mission file. Please modify/delete
after transmission." is displayed
and you cannot delete destinations
for this Group.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Register/Delete Menu
D
Enter the function number for
"Register/Delete" with the num-
ber keys.
E
Enter the number for "Delete
Group Dial" with the number
keys.
Note
If "Delete Group Dial" is not
shown, press [ Prev.] or [ Next].
F
Enter the Group Dial number you
wish to delete with the number
keys.
The registered Group is shown on
the display.
Note
If you make a mistake, press
[No] and press the correct key.
You can press [Status] to see the
status currently programmed.
7
151