Ricoh 3245e Operating Instructions Manual page 535

Note
If you want to use "RARP +
TFTP", "BOOTP" or "DHCP",
you must configure the server.
When selecting DHCP, assign
the scanner a fixed IP address.
P.45 "When Using DHCP"
Delivery Server Address
This is the server IP address used to
deliver the scanned originals to a cli-
ent on the network. Set this address
when you use the machine as a Net-
work Delivery Scanner. Set the ad-
dress as follows: xxx.xxx.xxx.xxx
(xxx: for any numerical value from
0–255)
Note
To get the delivery server IP ad-
dress for the scanner, contact
the network administrator.
Mac Address
You can confirm the MAC address
of the scanner unit installed in the
machine. The MAC address has al-
ready been assigned for each ma-
chine, and therefore, cannot be
changed.
P.45 "When Using DHCP"
P.46 "Assigning an IP Address
with ARP+PING"
Setting Up the Network Environment
2
15