Multistep Transfer - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 196 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools

Multistep Transfer

This machine can be used to build up a multi-step facsimile network that allows
messages to be sent via multiple Transfer Stations and achieve greater efficiency
in processing Transfer Requests.
The Polling IDs of all parties involved in the multi-step transfer must be identi-
cal.
The following procedure describes how to enter the multi-step transfer station
(the 2nd transfer station) number. Providing a Group contains the appropriate
End Receiver Information, when your machine receives a Transfer Request, it
will pass the message to the Transfer Station(s) you specify. For how to program
the appropriate End Receiver Information, see P.147 "Registering End Receivers
for Multi-step Transfer".
7
Limitation
The requesting party's fax number must be stored in a Quick Dial or Speed
Dial in all transfer stations (the 1st transfer station and the 2nd transfer sta-
tion) for this feature to work.
All parties must store their own number for the Transfer Report or this fea-
ture will not work.
The multi-step transfer end receiver must be stored in a Group in the 2nd
transfer station beforehand.
A
Make sure that the machine is in Facsimile mode and the standby display
is shown.
Note
If the standby display is not shown, press the {Fax} key.
196
P.218 "Transfer Report"