Ricoh 3245e Operating Instructions Manual page 484

Chapter7 Page 232 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools
How to Change the User Parameters
• We recommend that you print the
User Parameter list and keep it
when you register or change a user
parameter.
User Parameter List"
• Do not change any bit switches
other than those shown on the pre-
vious pages.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
7
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
232
P.233 "Printing the
D
Enter the function number for
"Key Op. Settings" with the num-
ber keys and press the { { { { #} } } } (Enter)
key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [ Next].
E
Enter the "User Parameters" code
with the number keys.
Note
If "User Parameters" is not
shown, press [ Prev.] or [ Next].
F
Select a number for a switch you
wish to change by pressing
[ Switch] or [ Switch].
G
Press a number key correspond-
ing to the bit number you wish to
change e.g., press { { { { 0} } } } to change
bit 0.
H
When you have finished, press
[OK].