Ricoh 3245e Operating Instructions Manual page 410

Chapter7 Page 158 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools
F
Press a Quick Dial key you want
to register.
The "Store Program" display is
shown.
Note
If you make a mistake, press
[Cancel] and press the correct
key.
You can press [Status] to see the
status currently programmed.
G
Press [Feature].
7
H
Carry out the sequence of opera-
tions you wish to store in this pro-
gram, then press [OK].
158
Note
If you press the {Clear Modes/En-
ergy Saver} key, the display re-
turns to the
keystroke programming.
For example, say you wish to
use Send Later to destination
number 0123456789. The se-
quence of operations would be:
• Enter "0123456789" using the
number keys.
• Press [Mode].
• Enter the function number
for "Send Later" using the
number keys.
• Set Send Later
Later".
If a program is already stored in
the Quick Dial key, the function
name is shown on the display. If
you want to change the pro-
gram, press the {Clear Modes/En-
ergy Saver} key and program
function again.
I
Press [OK].
steps before
P.80 "Send