2-Sided Scanning - Ricoh 3245e Operating Instructions Manual

Basic Operation

2-sided Scanning

A
Set the originals in the document feeder (ADF) with the side to be scanned
first (the front side of the original) face up.
4
Note
The sheets of the original should be ordered in the preferred page sequence.
To avoid a multi-sheet feed (in which the ADF feeds through more than
one sheet at a time), shuffle the pages of the original before setting them in
the document feeder (ADF).
Set the original with the same direction of the front side as shown in the
illustration. The direction of the resulting scan of the reverse side will be
upside down, as shown below. However, you can rotate the direction of
the resulting scan by changing the settings of Type 270 TWAIN Driver
Ver.2. For more information about changing the settings, see the Help that
come with Type 270 TWAIN Driver Ver.2.
B
34
Adjust the guide on the document feeder (ADF) to the size of the originals.
2
1
4
3
6
5
TACY040E
TACY060J
TACY070E