Reception Functions; Transfer Station - Ricoh 3245e Operating Instructions Manual

System settings
Table of Contents

Advertisement

Chapter3 Page 64 Thursday, January 27, 2000 1:55 PM
Receiving a Fax Message

Reception Functions

Transfer Station

Transfer Stations allow you to expand
the standard features of your fax ma-
chine to set up complex networks.
Transfer Stations must be machines of
the same make.
3
The diagram below may make the
concept clearer.
Transfer station
Requesting
party
Transfer
result report
The following terminology is used in
this section.
Requesting Party
The machine where the message
originates from, i.e. the machine
making a Transfer Request.
Transfer Station
The machine that forwards the in-
coming message to another desti-
nation, i.e. the machine that
receives the Transfer Request. In
this section this refers to your ma-
chine.
End Receiver
The final destination of the mes-
sage, i.e. the machine that the
Transfer Station sends to. End Re-
ceivers must be programmed into
Quick Dials, Speed Dials or
Groups in the Transfer Station
(this machine).
64
Limitation
Polling IDs of the Requesting Party
and Transfer Station must be iden-
tical for this feature to work.
If the Transfer Report setting is not
programmed at the Transfer Sta-
tion, reception will not take place.
This machine will not receive a
Transfer Request unless it has
enough free memory to store two
End Receiver
or more destinations dialed from
the number keys.
If the Requesting Party specifies a
End Receiver
Group for the End Receivers and
the total number of End Receivers
exceeds 300, (500 with optional Fax
End Receiver
Feature Expander installed) the
Transfer Station cannot transfer
the message and sends a Transfer
ND1X00E4
Result Report to the Requesting
Party.
Reference
P.103 "Transfer Request"
- Multistep Transfer
-
-
-
The principles of Transfer Stations
can be used to build up a multi-step
facsimile network where messages
are passed through several Transfer
Stations. By programming the end re-
ceivers in a Transfer Station Group,
you can enable this machine to trans-
fer messages onto other Transfer Sta-
tions.
For more information, contact your
service representative.
This feature can only be used if the
machines are made by the same mak-
er.

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Aficio 350eAficio 450e

Table of Contents