Initial Setup Tx - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 172 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools

Initial Setup TX

When you turn on the machine or re-
turn to Copy mode, the machine re-
turns to the home settings. You can
change these home settings so that
the machine starts with your most fre-
quently used features selected.
This procedure can be used to change
the home settings for the transmis-
sion mode
Transmission) and scan settings (Res-
olution, Photo Original, Auto Image
Density, and Fax Auto Reset).
Note
You can also choose whether the
machine returns to the home set-
tings after each communication.
P.227 "Changing the User Parame-
ters"
A
Make sure that the machine is in
7
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
172
(Memory/Immediate
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, see the System Settings
manual.
D
Enter the function number for
"Initial Setup TX" with the num-
ber keys.
The "Initial Setup TX" menu is
shown on the display.
Note
If "Initial Setup TX" is not
shown, press [ Prev.] or [ Next].
E
Enter the function number with
the number keys.
Note
If you make a mistake, press
[Cancel] and enter the correct
number.
F
Select the mode you want to
change using the < < or > < <
then press [OK].
> key > >