Ricoh 3245e Operating Instructions Manual page 390

Chapter7 Page 138 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools
E
Enter the number for "Reg. Quick
Dial" with the number keys.
Note
If "Reg. Quick Dial" is not
shown, press [ Prev.] or [ Next].
F
Press the Quick Dial key which
you want to register.
Note
If you press a wrong key, press
[PrevMenu] then try again.
You can press [Status] to see the
status currently programmed.
7
G
Enter a fax number with the num-
ber keys.
Note
If you make a mistake, press the
{Clear/Stop} key and try again.
If a fax number is already regis-
tered in this Quick Dial key, the
number and communication
type are shown on the display.
If you wish to change the fax
number, press the {Clear/Stop}
key and enter another number.
138
You cannot omit the fax num-
ber.
H
Press [Name].
Note
If you wish to omit the destina-
tion name, go to step K.
I
Enter the destination name.
Note
If a destination name is already
registered in this Quick Dial
key, the name is shown on the
display. If you wish to change
this name, press the {Clear/Stop}
key and enter another name.
Reference
P.237 "Entering Text"
J
Press [OK].
The fax number and name are dis-
played.
Selecting Label Insertion/TTI
Print
A Press [Others] after step J J J J .
B Enter the "Label Insertion"
function number with the
number keys.