Environments - Ricoh 3245e Operating Instructions Manual

Installing the Driver

Environments

To use Type 270 TWAIN Driver Ver.2, the following hardware and software en-
vironments are required.
Personal Computer
75 MHz or faster Intel Pentium CPU (200 MHz or faster recommended)
The computer must have a CD-ROM drive. (The driver is provided on a CD-
ROM.)
OS
3
Windows 95/98 or Windows NT 4.0/3.51
Note
Windows 3.1x is not supported.
Memory
Windows 95/98: 16 MB or more (48 MB or more recommended)
Windows NT 4.0/3.51: 24 MB or more (64 MB or more recommended)
Display
Requires SVGA (800 600) supporting 256 colors or more.
Hard Disk
100 MB of hard disk space (100 MB or more recommended) are required for
the installation, save and preview image files.
Ethernet Board
It must be compatible with Windows 95/98 or Windows NT 4.0/3.51 envi-
ronments.
Note
The Ethernet board does not work if it is not recognized in the Windows
95/98 or Windows NT 4.0/3.51 environments.
Ethernet Cable
Use category 5 STP cabling with an RJ-45 connector.
Network Protocol
TCP/IP
TWAIN Compliant Application
An application compliant to TWAIN 1.6 or later must be installed.
Note
If you are not sure that the application you are using is compliant to
TWAIN 1.6 or later, contact the manufacturer of the application.
22