Setting Originals - Ricoh AD1 Reference Operation Manual

SETTING ORIGINALS

Sizes and scanning area/missing image area
Reference
position
Horizontal
size
Vertical
size
Maximum Scanning area
A3
11" x 17"
A4 A3
Exposure glass
When you correctly set an original in the document feeder or on the exposure
glass, an area of about 3mm width surrounding the original might not be copied.
Set the original on the exposure glass or in the document feeder. This should
be done correctly according to the type of originals and copying method.
Align the original to the rear left corner. The copying results might vary depend-
ing on the direction of the set original. See the description of each function.
Set the original after correction fluid and ink has completely dried. Not taking this
precaution could mark the exposure glass causing marks to be copied.
4
A3
(297 x 420 mm)
(279 x 432 mm)
<Originals> <Set in the document feeder> <Set on the exposure glass>
Horizontal
size
Vertical
size
Maximum Scanning area
(297 x 1260 mm)
A4 A3
Document feeder

SETTING ORIGINALS