Chapter7 Page 160 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools
Using a Keystroke Program
E.g. execute a program using Send
Later for the fax number
"0123456789."
A
Set your original.
Note
If the destination, resolution,
contrast and/or original type
are not registered in the pro-
gram, carry out these opera-
tions now.
B
Press the Quick Dial key pro-
grammed with the Keystroke Pro-
gram.
7
In this example, the program name
"WEEKLY" is shown on the dis-
play.
C
Press [Exit] then the { { { { Start} } } } key.
The machine starts scanning the
original.
The message will be sent at the
specified time.
Deleting a Keystroke Program
Limitation
When a registered program is being
used for a standby Memory Trans-
mission, the following message ap-
pears and you cannot delete the
160
program:
This destination is
in use for standby transmis-
sion file. Please modify/de-
lete after transmission.
Note
If you delete a program, the regis-
tered program name is also delet-
ed.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, see the System Settings
manual.