Redial - Ricoh 3245e Operating Instructions Manual

Chapter2 Page 53 Thursday, January 27, 2000 1:54 PM
• Press the User Function key
{F1}–{F5} assigned the Group
function, then enter the Group
number with the number keys.
Note
To see which Groups have
been programmed,
[GpD List] after you press the
User Function ({F1}–{F5})
key. P.179 "Assigning User
Function Keys"
The Group number is shown on
the display. If the Group Name is
programmed, the name is also
shown on the display.
Note
If you make a mistake, press the
{Clear/Stop} key and start again.
If you wish to dial another des-
tination, press [Add] and dial an-
other fax number.
C
Press the { { { { Start} } } } key.

Redial

The machine memorizes the last 10
destinations that have been dialed. If
you wish to send a message to a des-
tination which you faxed to recently,
press
the Redial feature saves you finding
and entering the number again.
A
Press the { { { { Pause/Redial} } } } key.
B
A list of previously dialed num-
bers will flash up. If you cannot
see the number you need use the
[ Prev.] and [ Next] keys to scroll
through them. Then enter the
code for the number you wish to
redial e.g., "01".
Limitation
The following kinds of destina-
tions are not memorized:
• Quick Dials
• Speed Dials
• Group Dials
• Destinations dialed by a Pro-
gram
• Destinations dialed as End
Receivers for Transfer Re-
quest
Number Keys
2
53