Deleting An Irregular Area - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 168 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools
Note
Each time you press [mm
inch], the units change between
"inch" and "mm" alternately. If
you enter a length and change
the unit by pressing [mm
inch], the length is converted au-
tomatically according to the
unit (fractions are rounded off).
For example, when you enter
{2}, {5}, and {0} in millimeters
and change to "inch", the length
"9.8inch" is shown on the dis-
play. If you press [mm
again, "249mm" is displayed.
K
Press [OK].
L
Press the { { { { User Tools/Counter} } } } key.
7

Deleting an Irregular Area

A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
168
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax".
inch]
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, see the System Settings
manual.
D
Enter the function number for
"Register/Delete" with the num-
ber keys.
E
Enter the "Delete Irreg.Area"
code with the number keys.
Note
If "Delete Irreg.Area" is not
shown, press [ Prev.] or [ Next].
The registered sizes are displayed.