Checking The Transmission Result (Tx File Status) - Ricoh 3245e Operating Instructions Manual

Chapter5 Page 118 Thursday, January 27, 2000 1:56 PM
Communication Information
Checking the Transmission Result (TX File
Status)
If you wish to find out whether a file
was sent successfully, you do not
have to always print the TCR. With
this function you can browse through
the last 50 completed transmissions
on the display.
Limitation
Only the last 50 communications
are shown. Earlier transmissions
are not available.
If a transmission is completed
while you are using this function,
5
the result will not be shown until
you exit TX File Status and start it
again.
A
Press [Info.].
The Information menu is shown.
B
Enter the "TX Status" function
number with the number keys.
Note
If "TX Status" is not shown,
press [ Prev.] or [ Next].
118
C
Press [ Prev.] or [ Next] to scroll
through the list.
The results are shown two at a time
with the most recent above.
D
Press [OK].
The initial display is shown.
E
Press [Exit].