G3 Analog Line - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 219 Thursday, January 27, 2000 1:57 PM
Note
If "Key Op. Settings" is not
shown, press [ Next].
E
Enter the "Transfer Report" code
with the number keys.
Note
If "Transfer Report" is not
shown, press [ Prev.] or [ Next].
Storing Your Own PSTN G3 Fax
Number
A Enter the "G3 Direct Number"
code with the number keys.
B Enter your own fax number
with the number keys.
C Press [OK].
Storing Your G3 PABX Number
If you wish to store your G3 PABX
number, contact your service rep-
resentative.
A Enter the "G3 PABX. Number"
code with the number keys.
Key Operator Settings
B Enter your own fax number
with the number keys.
C Press [OK].
Storing a G4 Fax Number
A Enter the "G4 Fax Number"
code with the number keys.
B Enter your own fax number
with the number keys.
C Press [OK].
F
Press [PrevMenu] twice.
G
Press the { { { { User Tools/Counter} } } } key.

G3 Analog Line

This function must be set up before
you connect the machine to a G3 ana-
log line.
You can register the following items
with a G3 analog Line:
• PSTN Line Type (Dial Pulse/Tone)
• CSI (up to 20 digits)
Note
A CSI (Called Station Identifica-
tion) is notified to a receiver or
sender when you send or receive a
fax. When the CSI is received, it is
7
219