Setting Originals On The Exposure Glass - Ricoh FT3813, FT4615, FT4618 Operating Instructions Manual

SETTING ORIGINALS ON THE EXPOSURE
Set the original after correction fluid and ink has completely dried. Not taking
this precaution could mark the exposure glass and cause marks to be copied.
.
1
Lift the platen cover or the op-
tional document feeder.
When lifting the platen cover, hold it
in the center.
.
2
Set the original face down on the
exposure glass. The original
should be centered according to
the size marks on the left scale.
.
3
Lower the platen cover or the op-
tional document feeder.

SETTING ORIGINALS ON THE EXPOSURE GLASS

GLASS
19