Monitor Volume - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 191 Thursday, January 27, 2000 1:57 PM
D
Enter the function number for
"Key Op. Settings" with the num-
ber keys and press the { { { { #} } } } (Enter)
key within 3 seconds.
Note
If "Key Op. Settings" is not
shown, press [ Next].
E
Enter the "Counters" code with
the number keys.
The totals are displayed.
F
When you have checked the to-
tals, press [OK].
G
Press [PrevMenu].
H
Press the { { { { User Tools/Counter} } } } key.

Monitor Volume

You can change the volume of the fol-
lowing sounds the machine makes.
On Hook
When you press the {On Hook Dial}
key.
Transmission
When the machine send a mes-
sage.
Key Operator Settings
Reception
When the machine receive a mes-
sage.
Dialing
After pressing the {Start} key, this
sound is output until the line con-
nects to the destination.
Printing
Sounds when a received message
has been printed.
Completion Beep"
Limitation
Monitor Volume is not available
with G4 Unit.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the code for "Fax" with the
number keys.
The Facsimile User Tool main
menu appears.
P.68 "Print
7
191