Printing Functions; Print Completion Beep; Checkered Mark; Center Mark - Ricoh 3245e Operating Instructions Manual

Chapter3 Page 68 Thursday, January 27, 2000 1:55 PM
Receiving a Fax Message

Printing Functions

Print Completion Beep

By default, the machine beeps to let
you know when a received message
has been printed.
Note
3
You can alter the volume of the
beep or turn it off completely (set
the volume to the minimum level).
P.191 "Monitor Volume"

Checkered Mark

By default, a checkered mark is print-
ed on the first page of fax messages to
help you separate them.
Note
You can turn this feature off with
the Initial Setup RX settings.
P.174 "Initial Setup RX"

Center Mark

By default, marks are printed halfway
down the left side and at the top cen-
ter of each page received. This makes
it easy for you to position a hole
68
puncher correctly when you file re-
ceived messages.
Limitation
The center mark may deviate a lit-
tle from the exact center of the
edge.
Note
You can turn this feature off with
the Initial Setup RX.
tial Setup RX"

Reception Time

You can have the date and time when
a message was received printed at the
bottom of the received image. This
ND1X00E5
feature is turned off by default—turn
it on with the Initial Setup RX set-
tings. P.174 "Initial Setup RX"
Limitation
When a received message is print-
ed on two or more sheets, the date
and time is printed on the last
page.
Note
The date and time when the mes-
sage was printed can also be re-
corded on the message. If you need
this feature, please contact your
service representative.
ND1X00E6
P.174 "Ini-