Using Windows Nt 3.51 - Ricoh 3245e Operating Instructions Manual

Installing the Driver
Uninstalling
When Type 270 TWAIN Driver Ver.2
is no longer needed, uninstall it. You
can delete Type 270 TWAIN Driver
Ver.2 and other related files from the
hard disk. When reinstalling Type
270 TWAIN Driver Ver.2, uninstall it
first, and then reinstall it.
Note
3
When uninstalling, the setting val-
ues file is not deleted.
A
Double-click the [My Computer]
icon, and then double-click [ Con-
trol Panel].
B
Double-click
grams].
[Add/Remove Program Properties] ap-
pears.
C
Click [Type 270 TWAIN Driver Ver.2]
and then click [Add/Remove].
A dialog box appears to confirm
cancellation.
D
Read the message on the screen
carefully. If you agree, click [Yes].
Uninstallation starts.
E
When [Uninstall successfully] is in-
dicated below the dialog box,
click [OK].
The dialog box closes.
26
[Add/Remove Pro-

Using Windows NT 3.51

Preparation
Before installation, confirm that
the computer you are using is con-
figured to use the TCP/IP proto-
col, by selecting [Network Settings]
in [Network] from [Control Panel].
Note
To install the Type 270 TWAIN
Driver Ver.2, you must be logged
on as a member of the Administra-
tors group.
Installing
A
Close all the applications that are
currently running.
B
Insert the CD-ROM into the CD-
ROM drive.
C
Open [File Manager].
D
From the file menu, click [Run...].
[Run] appears.
E
Type the name of the CD-ROM
drive in the command line, fol-
lowed by "\DRIVER\TWAIN\
OTHERS\SETUP.EXE" (do not
include the quotation marks), and
then click [OK].
Note
An example would be "D:\DRIVER\
TWAIN\OTHERS\SETUP.EXE"
when the drive letter is "D".
The [welcome] dialog box appears.
F
Read the message on the screen
carefully, and then press [Next].
[Software License Agreement] ap-
pears.