Registering End Receivers For Multi-Step Transfer - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 147 Thursday, January 27, 2000 1:57 PM

Registering End Receivers for Multi-step Transfer

In the first transfer station in the chain, store the special code of the Quick Dial,
Speed Dial or Group in which the end receiver fax number is stored in the sec-
ond transfer station in the chain. The following procedure describes how to pro-
gram an End Receiver into a Group. For how to enter this code, see P.105
"Specifying an End Receiver".
Reference
P.196 "Multistep Transfer"
P.103 "Transfer Request"
A
Make sure that the machine is in Facsimile mode and the standby display
is shown.
Note
If the standby display is not shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
Register/Delete Menu
7
147