Choosing The Area To Be Scanned Yourself (Irregular Scan Area) - Ricoh 3245e Operating Instructions Manual

Chapter4 Page 92 Thursday, January 27, 2000 1:55 PM
Advanced Transmission Features
Choosing the Area to be Scanned Yourself
(Irregular Scan Area)
Usually the machine automatically
detects the size of an original when it
is scanned. However, you may wish
to override this and choose the area to
be scanned yourself.
4
You can either choose one of the stan-
dard paper sizes (8
14"L, 11" 17"L, A4KL, A3L,
B4L) or one of two custom sizes pro-
grammed in advance (Area 1 and
Area 2). P.16 "Paper Size and
Scanned Area"
Although you can specify a different
scan area for each page when using
the exposure glass, only one size is al-
lowed when scanning from the Docu-
ment Feeder (ADF).
A
Set your original and select any
scan settings you require.
B
Press [Mode].
The Transmission Mode menu ap-
pears.
92
C
D
1 1
/ 11"KL, 8 / "
2 2
E
Enter the "Irreg. Scan Area" func-
tion number with the number
keys.
Note
If the appropriate display is not
shown, press [ Prev.] or [ Next].
Press the < < or > > key to select the
< < > >
paper size.
Note
To see which paper sizes have
already been programmed,
press [Status].
To cancel the Irreg. Scan Area,
press [Cancel].
Press [OK]. The Transmission
Mode menu is shown. A check
mark is added to "Irreg. Scan Ar-
ea".