Setting Originals On The Exposure Glass - Ricoh FT2012+ Operating Instructions Manual

SETTING ORIGINALS ON THE EXPOSURE GLASS

SETTING ORIGINALS ON THE EXPOSURE
1
Lift the platen cover.
2
Set the original face down on
the exposure glass. The original
should be centered to the arrow
mark on the scale.
.
3
Lower the platen cover.
When copying book originals it is
important that the platen cover and
exposure glass are parallel. This
prevents streaming light and using
unnecessary toner enabling you to
make clear copies. Therefore, be-
fore lowering the cover lift it from
it's hinges at the rear.
Book original must be 20 mm,
0.78" thick or less.
10
GLASS