Chain Dial; Quick Dials - Ricoh 3245e Operating Instructions Manual

Chapter2 Page 49 Thursday, January 27, 2000 1:54 PM
D
Press the User Function key ({ { { { F1} } } } ,
{F2}, { { { { F3} } } } , { { { { F5} } } } ) in which the sub-
address function has been regis-
tered.
"/" will appear on the display.
E
Enter the destination subaddress
with the number keys.
F
Press the { { { { Start} } } } key.

Chain Dial

This allows you to compose a tele-
phone number from various parts,
some of which may be stored in
Quick Dials or Speed Dials and some
of which may be input using the
number keys.
Limitation
Maximum length of telephone or
fax number: 254 digits
Note
For Memory Transmission and Im-
mediate Transmission, insert a
pause between numbers. For On-
hook Dial and Manual Dial, no
pause is needed.
- (Example) 01133-1-555333 -
- -
Assume that 01133 is stored in Quick
Dial 01 and that 1 is stored in Speed
Dial 01.
A Place the original and select any
scan settings you require.
Press the Quick Dial key {01}.
B
Press the {Pause/Redial} key.
C
Press the {Speed Dial} key and {0}
D
and {1} using the number keys (if
the optional Fax Function Upgrade
Unit is installed, three digits are
reeded to specify a Speed Dial).
Enter {5}, {5}, {5}, {3}, {3} {3}
E
with the number keys.
Press the {Start} key.
F

Quick Dials

When you have stored a destination's
number in a Quick Dial key, you can
dial the number by just pressing that
key.
Additionally, you can store a name
that will appear on the display when-
ever you press that Quick Dial.
Note
To check the contents of the Quick
dial, print the list.
ports/Lists"
If a Quick Dial key is currently
used for another function, e.g. a
Group Dial, you cannot store a
number in it.
Flip the Quick Dial plate over to
access Quick Dial keys 01-28 or 29-
56.
You can have the label stored with
a Quick Dial printed on the first
page received at the other end.
P.106 "Label Insertion"
Reference
P.45 "Dialing"
Number Keys
2
P.170 "Re-
49