Using Sadf And Thin Paper Modes - Ricoh 3245e Operating Instructions Manual

Using SADF and Thin Paper
Modes
SADF mode
If you set one set of originals at a time
in the document feeder, the second
and subsequent originals can be fed
automatically without pressing the
{Start} key.
Limitation
Copying or scanning speed might
be a little reduced.
Up to 50 standard originals can be
set in the document feeder at a
time. If there are more than 50 orig-
inals, set SADF mode so that origi-
nals can be fed automatically
without pressing the {Start} key
each time they are set in the docu-
ment feeder.
A
Press the {Menu} key.
B
Press the [ Next] key until [DF Set-
ting] is displayed.
C
Select [DF Setting] with the <>
keys, then press the [Select] key.
D
Press the [Select] key.
Note
To deselect [SADF], press the
[Select] key again.
E
Press the [Exit] key.
F
Set one original face up into the
document feeder. Then, press the
{Start} key.
The Auto Feed indicator is lit.
ND2C0102
Setting Originals
2
ND2C0109
ND2C0104
ND2C0103
31