Storing Keystroke Programs - Ricoh 3245e Operating Instructions Manual

Chapter7 Page 156 Thursday, January 27, 2000 1:57 PM
Facsimile User Tools
E
Enter the number for "Delete
Speed Dial" with the number
keys.
Note
If "Delete Speed Dial" is not
shown, press [ Prev.] or [ Next].
F
Enter the Speed Dial code you
wish to delete.
The registered
shown on the display.
Note
If you make a mistake before en-
7
tering the first digit, press the
{Clear/Stop} key and enter the
correct number. If you make a
mistake after entering the last
digit, press [No] and enter the
number again.
You can press [Status] to see the
status currently programmed.
156
G
Press [Yes].
H
Press [Yes].
destination is
The Speed Dial is deleted.
I
Press the { { { { User Tools/Counter} } } } key.

Storing Keystroke Programs

If you regularly send messages to a
particular destination or transmit us-
ing the same features, you can save a
lot of repetitive keypad operations by
storing this information in a Key-
stroke Program.
Keystroke Programs can be recalled
by just pressing a Quick Dial key. The
following procedure can be used to
program a new Keystroke Program or
overwrite an old one.
You can register the following items
in Keystroke Programs:
Note
If you press [No], the Speed Dial
is not deleted and the display
shown in step F appears again.
Note
If you press [No], the Speed Dial
is not deleted and the display
shown in step F appears again.