Binding An Is-Is Process With Mibs; Displaying And Maintaining Is-Is - 3Com S7906E Configuration Manual

Binding an IS-IS Process with MIBs

Follow these steps to bind an IS-IS process with MIBs:
To do...
Enter system view
Enter IS-IS view
Bind the IS-IS process with
MIBs
Configuring BFD for IS-IS
Follow these steps to enable BFD on an IS-IS interface:
To do...
Enter system view
Enter interface view
Enable IS-IS on the interface
Enable BFD on the IS-IS
interface
For details about IS-IS, refer to IS-IS Configuration in the IP Routing Volume.

Displaying and Maintaining IS-IS

To do...
Display brief IS-IS configuration
information
Display the status of IS-IS
debug switches
Display the IS-IS Graceful
Restart state
Display information about IS-IS
enabled interfaces
Use the command...
system-view
isis [ process-id ]
[ vpn-instance
vpn-instance-name ]
isis mib-binding process-id
Use the command...
system-view
interface interface-type
interface-number
isis enable [ process-id ]
isis bfd enable
Use the command...
display isis brief [ process-id | vpn-instance
vpn-instance-name ]
display isis debug-switches { process-id |
vpn-instance vpn-instance-name }
display isis graceful-restart status [ level-1
| level-2 ] [ process-id | vpn-instance
vpn-instance-name ]
display isis interface [ statistics |
[ interface-type interface-number ]
[ verbose ] ] [ process-id | vpn-instance
vpn-instance-name ]
1-35
Remarks
—
—
Required
By default, MIBs are bound with
IS-IS process 1.
Remarks
—
—
Required
Disabled by default
Required
Not enabled by default
Remarks
Available in any
view
Available in any
view
Available in any
view
Available in any
view