3Com MSR 50 Series Configuration Manual page 454

3com msr 30-16: software guide
Hide thumbs Also See for MSR 50 Series:
Table of Contents

Advertisement

454
C
23: MSTP C
HAPTER
ONFIGURATION
The same VLAN-to-instance mapping (VLAN 1 is mapped to MST instance 1,
VLAN 2 to MST instance 2, and the rest to the command and internal spanning
tree (CIST). CIST refers to MST instance 0)
The same MSTP revision level (not shown in the figure)
Multiple MST regions can exist in a switched network. You can use an MSTP
command to group multiple devices to the same MST region.
2 VLAN-to-instance mapping table
As an attribute of an MST region, the VLAN-to-instance mapping table describes
the mapping relationships between VLANs and MST instances. In
example, the VLAN-to-instance mapping table of region A0 describes that the
same region name, the same VLAN-to-instance mapping (VLAN 1 is mapped to
MST instance 1, VLAN 2 to MST instance 2, and the rest to CIST). MSTP achieves
load balancing by means of the VLAN-to-instance mapping table.
3 IST
Internal spanning tree (IST) is a spanning tree that runs in an MST region.
ISTs in all MST regions and the common spanning tree (CST) jointly constitute the
common and internal spanning tree (CIST) of the entire network. An IST is a
section of the CIST in the given MST region.
In
Figure
130, for example, the CIST has a section in each MST region, and this
section is the IST in the respective MST region.
4 CST
The CST is a single spanning tree that connects all MST regions in a switched
network. If you regard each MST region as a "device", the CST is a spanning tree
calculated by these devices through STP or RSTP. For example, the red lines in
Figure 130
describe the CST.
5 CIST
Jointly constituted by ISTs and the CST, the CIST is a single spanning tree that
connects all devices in a switched network.
In
Figure
130, for example, the ISTs in all MST regions plus the inter-region CST
constitute the CIST of the entire network.
6 MSTI
Multiple spanning trees can be generated in an MST region through MSTP, one
spanning tree being independent of another. Each spanning tree is referred to as a
multiple spanning tree instance (MSTI). In
spanning tree can exist in each MST region, each spanning tree corresponding to a
VLAN. These spanning trees are called MSTIs.
7 Regional root bridge
Figure
130, for example, multiple
Figure
130, for

Hide quick links:

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents