Ethernet/Ip Communication - SMB MAT-LC-C Series User Manual

Step 5. Refer to chapter "2.3 Communication setup" for more information about
communication setting between LC-C06 and IPC.
Step 6. Run and debug
1）In menu, selecet "Online"→"Log on to..." to connect application program with LC-C06 and
enter online status. Then select in menu "Debug"→"Activate" to run application program in
LC-C06.
2）Start monitoring and debugging present project.
In device view, double click "PLC_PRG (PRG)" to open program diagram, trigger and download
each instruction in sequence.
7.1.6

EtherNET/IP communication

You can add any X device that supports Ethernet/IP communication on Codesys and make the
necessary adjustments to communicate with the SMB controller and perform the necessary
operations.
94