Electrical Specifications And Environmental Conditions - SMB MAT-LC-C Series User Manual

1.3

Electrical Specifications and Environmental Conditions

Electromagnetic compatibility (EMC) refers to the ability of electrical equipment to function
properly in its electromagnetic environment without interfering with the environment. Table 1-2
and Table 1-3 describe the electrical specification environmental condition standards that the
C06/C07 should comply with. Programmable logic controller standard: IEC61131-2, GB15969.
Table 1-2 Electrical Specifications
Electromagnetic Compatibility - Immunity
Electrostatic
IEC61000-4-2
Electrical Fast Transient Burst
IEC61000-4-4
Surge IEC61000-4-5
Radio
Electromagnetic
Radiation
IEC61000-4-3
RF Field Induced Conducted
Disturbance
IEC61000-4-6
DC power input port for short
interruptions
changes
IEC61000-4-29
Environmental Testing
High temperature
IEC60068-2
Low temperature
IEC60068-2
High
IEC60068-2
Low
IEC60068-2
High and low temperature cycle
operation IEC60068-2
High temperature
IEC60068-2
Low temperature
IEC60068-2
Thermal shock IEC60068-2
High temperature and high
humidity IEC60068-2
Alternating
IEC60068-2
Discharge
Frequency
Field
and voltage
operation
operation
temperature startup
temperature start
storage
storage
Damp Heat
Contact discharge: ±4KV
Air discharge: ±8KV
Power cord: 2KV, 5KHz
Signal line: 2KV, 5KHz (I/O coupling clip)
1KV, 5KHz (communication coupling clip)
Power cord: 2KV (asymmetric), 1KV (symmetric)
80MHz~1GHz，10V/m，80%AM（1KHz）
0.15MHz~80MHz，10V/m，80%AM（1KHz）
Short interruption: 10ms
Voltage change: 80%~120%, 100ms
60℃ for 16 hours
-10℃ 16 hours
60℃ for 2 hours
-10℃ for 2 hours
-10°C ~60°C dwell time 3 hours, temperature rise rate
1°C/min, 2 cycles
70℃ for 72 hours
-40℃ 72 hours
-40℃~70℃ dwell time 3 hours, temperature change time
<1min, 5 cycles
40℃ for 48 hours
25℃~55℃ 95% 2 cycles
9