10.8.3 Speed Changes in JOG Operation
● The value of ""JOG operation target speed"" in the axis setting area is constantly monitored
while the operation is being executed. When the target speed is changed, it will be changed
with the same acceleration.
● The speed change is executed after the completion of acceleration/deceleration.
● The speed range in which the JOG operation can be set is 1 Hz to 500 kHz. If a value out of
the range is set, the speed cannot be changed. The speed remains that before making this
setting.
● When the JOG acceleration time or JOG deceleration time is set to 0 ms, the speed will be
changed immediately.
WUME-FP7MXY-06
10.8 JOG operation
10-39