Panasonic FP7 User Manual page 27

■
External connection diagram
In Sink output mode or Push-pull output (negative
logic) mode
(Note 1) COM0 to COM3 are independent common terminals. They are not internally connected.
(Note 2) The two plus terminals (A19 and B19) on the output side are connected internally, and the two minus
terminals (A20 and B20) are connected internally.
(Note 3) The voltages of the external power supply of the output circuit and the power supply for the load circuit
should be within the range of 5 to 24 V.
Input Specifications
Item
Insulation system
Rated input voltage
Rated input current
Input impedance
Operating voltage range
Min. ON voltage/Min. ON current 4.2 V / 3 mA
Min. OFF voltage/Min. OFF
current
OFF→ON
Response time
WUME-FP7MXY-06
In Source output mode or Push-pull output
(positive logic) mode
5 - 24 V mode
Digital isolator
(Note 1)
5 V/12 V/24 V DC
Approx. 2 mA to approx. 10 mA (It automatically varies according to the input
voltage.)
Approx. 0.5 kΩ to approx. 4.3 kΩ (It automatically varies according to the
input voltage.)
±10% of each voltage
2.8 V / 1 mA
1.0 µs or less (at 5 V DC)
0.5 µs or less (at 12 V DC)
0.5 µs or less (at 24 V DC)
3.1 Input/Output Specifications
Specifications
12 - 24 V mode
7.5 V / 3 mA
5.0 V / 1 mA
3-3