Panasonic FP7 User Manual page 135

5.
Set "Counter elapsed value" and "Counter upper and lower limit values" as necessary.
6.
Press the [[OK]] button.
In the following example, the positioning function for two channels (CH0 and CH1) are
allocated to the Multi I/O Unit (H type). The control inputs of CH0 are allocated to the inputs
(X100-X103) of the internal I/O and the control inputs of CH1 are allocated to the inputs
(X104-X107) automatically. Also, the control outputs of CH0 are allocated to the outputs
(Y104, Y108, Y109) and the control outputs of CH1 are allocated to the outputs (Y105,
Y10A, Y10B) automatically.
The set values will be effective when they are downloaded to the PLC with programs or
other configuration information as a project.
WUME-FP7MXY-06
10.4 Setting of Positioning Function
10-19