6.2 Execution Example of Interrupt Function
(Note 1)
The input (X140) corresponds to (S2: IN0) in the program, and the output (X160) corresponds to (S3:
OT0).
(Note 2)
For the unit which uses direct input (IN) and direct output (OT), set ""Exclude this unit from I/O
refresh"" in the I/O map.
● For more information about how to use the counter function, refer to
● For more information about how to use the comparison output function , refer to
""8 Comparison Output
6-12
Function"".
""7 Counter
Function"".
WUME-FP7MXY-06