Panasonic FP7 User Manual page 121

Item
Stop
WUME-FP7MXY-06
Description
executed by turning on an allocated output (Y38-Y3B) using user
programs.
There are four modes, system stop, emergency stop, limit stop and
deceleration stop. Each control is executed by turning on an allocated
output (Y44-Y4F) using user programs. (Except limit stop)
System stop:
Stops all channels without deceleration time.
Emergency stop:
Stops each channel using a set ""emergency stop time"".
Limit stop:
Stops at the time of limit input using a set ""limit stop time"".
Deceleration stop:
Stops each channel using a set ""deceleration time"".
10.1 Positioning Function
Related page
"P.10-31"
10-5