10.11 Repeat Operation
Parameter name
■
Configurator PMX settings
● When selecting ""255: Repeat infinitely"" in the positioning repeat count parameter, program
this to stop the operation using the deceleration stop function.
10.11.2 Settings and Operations of Repeat Operation
● When the positioning table start contact or positioning simultaneous start contact turns on,
the pulse output starts.
● After starting the instruction, the unit executes the pulse output for a specified repeat count
and then stops the operation. For setting to execute the operation infinitely, use this function
in combination with the deceleration stop function.
10-62
Unit
Default
Settings
2 to 254
Repeat an operation for a specified
number of times.
255
Repeat an operation infinitely.
WUME-FP7MXY-06