6.2 Execution Example of Interrupt Function
■
Time chart (For the interrupt occurred when comparison values match)
Comparison output
(a)
setting value
(b) Counter elapsed value
(c)
Comparison
Comparison match
(d)
Interrupt
32-point input unit
(e)
Interlock input
32-Point output unit
(f)
External output
6-10
(1) The count value is reset when the reset signal turns on.
The comparison output turns on when the elapsed value is smaller than
(2)
the setting value.
An interrupt occurs when the elapsed value agrees with the comparison
(3)
output setting value by the interrupt occurrence condition.
(4) Counting is disabled while the mask signal is on.
WUME-FP7MXY-06