Panasonic FP7 User Manual page 113

9.4 Execution Example of Pulse Output / PWM Output Function
enable input (X140) is on, the pulse output will start. When the value of the pulse output counter
reaches the comparison output setting value, the pulse will stop.
■
Configuration
● Set the pulse output to the outputs (Y108-Y109).
● Select ""PLS output - Comparison match stop"" in the ""Pulse Output Advanced" " dialog
box, and input a frequency.
● Select ""When start signal rises"" for the data update timing.
● Select ""Comparison match output"" in the function selection tree, and double-click the
comparison match number CMP0 to open the "Advanced" dialog box.
● In the "Advanced Setting" dialog box, select ""Pulse output PLS0"" and ""ON when elapsed
value is larger than or equal to setting value"", and input a comparison value.
■
Time chart
If the rising of the start signal is detected when the enable input is on, pulses will be output. The
pulse output counter reaches the comparison value, the pulse output will stop.
WUME-FP7MXY-06 9-17