Panasonic FP7 User Manual page 22

2.1 Names and functions of parts
2.1 Names and functions of parts
2.1.1 Names and functions of parts
■
Names and functions of parts
No. Name
Operation monitor
(1)
LEDs
(2) I/O connector
(3) DIN hook
(4) Unit connector
Mode setting
(5)
switches
(6) Fixing hook
2.1.2 Operation monitor LEDs
LED Content
1 - Power supply of the unit
2-2
Functions
Indicates the operation mode, error occurrence state and input and output
states. For details, refer to
Connector for input and output. (40-pin) (Conforms to MIL standard.)
This hook is used to install the unit on a DIN rail.
Connects the internal circuits between units.
Change the switch to use the interrupt function. At the factory setting, all the
switches are off (the setting not to use the interrupt function). For details, refer
to ""2.1.3 Mode setting switches"".
This hook is used to fix units.
Col
or
Blu
e
""2.1.2 Operation monitor
LED ON LED OFF
ON OFF
LEDs"".
LED Flashing
―
WUME-FP7MXY-06