Panasonic FP7 User Manual page 104

9.1 Pulse Output / PWM Output Function
■
Updating data when PLS start signal rises
In this mode, the data update is performed with the data when a PLS start signal turns on. The
frequency value changed at this timing will be reflected when the outputting pulse falls next
time.
■
Updating data when comparison output is performed
In this mode, the data update is performed with the data when the counter elapsed value
matches the comparison value. The frequency value changed at this timing will be reflected
when the outputting pulse falls next time.
■
Updating data when unit memory (UM) is rewritten
This mode updates using data as of when the unit memory (UM) was written. The frequency
value changed at this timing will be reflected when the outputting pulse falls next time.
9-8 WUME-FP7MXY-06