Panasonic FP7 User Manual page 60

5.3 Application Setting
■
High-speed counter (HSC0-HSC3 / PLSC0-PLSC3: Selectable by channel.)
Setting item
Function setting
Elapsed value hold mode
Count mode
Counter elapsed value
Counter preset value
Counter upper/lower limit
values
■
Comparison match output (CMP0-CMP7: Selectable by one comparison output.)
Setting item
Compare
Counter to be compared
Comparison Output
Function
Comparison value
Comparison output
destination
(Note 1) To set comparison match output, one of the following must be set: high-speed counter, pulse output, or
positioning (H type only).
● For details of the interrupt function, refer to page "P.6-2".
● For details of the high-speed counter function, refer to page "P.7-2".
● For details of the comparison match output function, refer to page "P.8-2".
■
Pulse output / PWM output (PLS0-PLS3 / PWM0-PWM3: Selectable by channel.)
Setting item
Function setting
Data update timing
Frequency
Duty
Counter elapsed value
5-10
Settings
Unused/Direction distinction/Individual input/Phase input (multiplied by 1)/Phase
input (multiplied by 2)/Phase input (multiplied by 4)
Switch on the checkbox for using this mode.
Ring / Linear
-2147483648 to +2147483647
-2147483648 to +2147483647
-2147483648 to +2147483647
Settings
Switch on the checkbox for comparing.
High-speed Counter CH0/CH1/CH2/CH3
Pulse Output PLS0/PLS1/PLS2/PLS3
Positioning (H type only) CH0/CH1/CH2/CH3
ON when elapsed value is smaller than setting value / ON when elapsed value is
larger than or equal to setting value
-2147483648 to +2147483647
External terminal/Internal I/O
Internal I/O
Settings
Unused/PLS output - Direction distinction/PLS output - Individual output/PLS
output - Phase output/PLS output - Comparison match stop/PWM output
When start signal rises
When start signal rises or upon comparison match output
When start signal rises or when data is updated
For pulse output: 0 to 500,000 (Can be set in 1 Hz increments)
For PWM output: 0 to 100,000 (Can be set in 1 Hz increments)
0.0 to 100.0 (0.0% to 100.0%) (Only when using PWM output)
-2147483648 to +2147483647
WUME-FP7MXY-06