Panasonic FP7 User Manual page 230

13.4 Unit Memory Detailed Information
(Note 1) Do not use this setting.
(Note 2) The default value when the power is on has been set to ""Not used"".
Precautions when making settings with programs
● Output polarity should be set in increments of four external input terminals (four groups).
● Although it is possible to specify different polarities in the same unit, be very careful with the
wirings.
● As the output polarities are set for the external output terminals (A11 to A18, B11 to B18),
each function corresponding to the outputs X0 to XF is also effective for the allocated
terminals.
● If different polarities are mixed in UM00104, a warning occurs to pay attention to the wiring.
(The ERR. LED on this unit flashes.)
To disable warning announcement, set "Warning annunciation" to ""Not announce"" in the
""Multi I/O Unit Setting"" screen of tool software FPWIN GR7. (Available since Ver.1.1.) Or,
set the bit 9 of UM00062 to 1.
● Set to agree the poloarities of outputs to wirings. For details of the output specifications, refer to
""3.1.3 Output
■
Output contact terminal interrupt setting
Unit memory
Name
No. (Hex)
Output contact
UM00105 terminal interrupt
setting
Allocation of unit memories
UM number
Bit no.
Terminal number
I/O no.
Setting value
Initial value (Hex)
The values (Hex) of terminal number and I/O number (for four outputs) are written to the four
bits of the unit memory.
Setting value
H0
H 1
H 2
H 3
H4 to HE
HF (Default)
(Note 1) Do not use this setting.
13-28
Specifications"".
Default
H FFFF
UM00105
b15-b12
B18-B15
YF-YC
H F
Output contact
Y0-Y3
Y4-Y7
Y8-YB
YC-YF
(Note 1)
Disabled
(Note 2)
Basic arrangement
Setting range and description
Set the I/O numbers allocated to terminal
numbers.
b11-b8 b7-b4
B14-B11
YB-Y8
H F
b3-b0
A18-A15 A14-A11
Y7-Y4 Y3-Y0
H F
WUME-FP7MXY-06
R W
A A
H F