Setting Example Of Pwm Output - Panasonic FP7 User Manual

9.4 Execution Example of Pulse Output / PWM Output Function
(1) If the rising edge of the start signal is detected when the enable signal is on, pulses will be output.
(2) The pulse is output.
When the comparison output turns on, the pulse output will stop. Also, when the enable signal turns off,
(3)
the pulse output will turn off.
■
Sample program
The external inputs (X140, X141) are allocated to the enable (Y118) and start (Y11C) signals of
pulse output respectively.

9.4.4 Setting Example of PWM Output

■
Overview
The PWM output is performed. It is controlled by the switch input (X140/X141) connected to the
32-point input unit. If the start input (X141) turns on when the enable input (X140) is on, the
PWM output will start.
9-18 WUME-FP7MXY-06