Panasonic FP7 User Manual page 42

3.4 Connection Using the Push-In Connector
After inserting the wire, ensure that the wire does not protrude.
Replacing Wires
Follow the procedure below when replacing wires.
Use the following dedicated tool or an equivalent flat-head screwdriver to remove the wire.
Dedicated tool
Manufacturer
Phoenix Contact Co. Ltd
1.
Push the dedicated tool or flat-head screwdriver into the release button on the product.
3-18
Model number
SZS 0, 4x2, 5
Remarks
Blade width 0.4 × Blade thickness 2.5
WUME-FP7MXY-06