Panasonic FP7 User Manual page 236

13.4 Unit Memory Detailed Information
Set by writing the values below to the 4 bits allocated to each comparison output number. When
allocating them using the tool software, it is not necessary to write them.
Setting value (UM00141/UM00140)
Setting value
H0
H 1
H 2
H 3
H 4
H 5
H 6
H 7
H8
H9
HA
HB
HC
HD
HE
HF (Default)
Allocation of unit memories （UM00143/UM00142）: Comparison output enable
setting
UM number UM00143
Bit no. b15-b12
CMP CMP7
number
Setting
value
H F
Initial value
(Hex)
Settings to enable/disable the comparison output and the output destination are set by writing
the values on the next page to the 4 bits allocated to each comparison output number. When
allocating them using the tool software, it is not necessary to write them.
Setting value
H0
H 1
H2 to HE
13-34
Functions
Comparison output setting
ON when elapsed value is
smaller than setting value
ON when elapsed value is
larger than or equal to setting
value
ON when elapsed value is
smaller than setting value
ON when elapsed value is
larger than or equal to setting
value
b11-b8 b7-b4
CMP6 CMP5
H F H F
Functions
Comparison output
setting
Enabled
Disabled
Counter channel to be compared
HSC-CH0
HSC-CH1
HSC-CH2
HSC-CH3
HSC-CH0
HSC-CH1
HSC-CH2
HSC-CH3
PLSC-CH0
PLSC -CH1
PLSC -CH2
PLSC -CH3
PLSC-CH0
PLSC -CH1
PLSC -CH2
PLSC -CH3
UM00142
b3-b0 b15-b12
CMP4 CMP3
H F H F
Output destination
External terminal/Internal I/O
(Note 2)(Note 3)
Internal I/O only
Disabled
External input counter
External input counter
Pulse output/PWM output
counter
Pulse output/PWM output
counter
b11-b8 b7-b4
CMP2 CMP1
H F H F
(Note 1)
WUME-FP7MXY-06
b3-b0
CMP0
H F