Panasonic FP7 User Manual page 93

The set values will be effective when they are downloaded with programs or other
configuration information as a project.
● Precautions when using FPWIN GR7 for configuration
On the unit ver.1.0x, internal contacts cannot be set as the comparison output destination.
When selecting internal contacts as the comparison output destination on the tool software, the
registration of the comparison function is set not to be used.
● This function can also be set by writing to the comparison output setting area of unit memories
with user programs. For details on unit memories, refer to
Area"".
WUME-FP7MXY-06
8.1 Comparison Output Function
""13.4.7 Comparison Output Setting
8-5