Panasonic FP7 User Manual page 92

8.1 Comparison Output Function
4.
Select a counter to be compared from the pull-down box.
Select High-speed counter (CH0-CH3) or PLS output (PLS0-PLS3).
5.
Input the comparison condition and comparison value.
Select either ""ON when elapsed value is smaller than setting value"" or ""ON when
elapsed value is larger than or equal to setting value"" for the comparison condition.
6.
Select a comparison output destination.
Select either ""External terminal/Internal I/O"" or ""Internal I/O"".
7.
Press the [[OK]] button.
The selected condition will be registered in the ""Multi I/O Unit Setting"" dialog box.
The following figure shows an example of allocating the output compared to ""High-speed
counter (Direction distinction)"" to the output (Y100) of the multi I/O unit. The control input
for monitoring is automatically allocated to the input (X110) of the unit's internal I/O.
8-4 WUME-FP7MXY-06