Panasonic FP7 User Manual page 149

■
Dwell time setting
The dwell time setting is invalid in the stop operations regardless of patterns.
■
Flag processing
● In the case of system stop, the busy signal turns off and the operation done signal turns on.
● In the cases of emergency stop, limit stop and deceleration stop, the busy signal turns off
and the operation done signal turns on after the completion of the pulse output during
deceleration.
■
Elapsed value area (Current value coordinate)
● Even in a stop operation, the elapsed value area is always updated.
● After the emergency stop, limit stop or deceleration stop, deceleration is performed with each
specified deceleration time, and the value when the pulse output stops is stored.
● In the case of system stop, the value when the pulse output stops is stored.
● For details of the deceleration stop operations when repetitive control is executed, refer to
"10.11.3 Stop Operation During Repeat
WUME-FP7MXY-06
Operation".
10.7 Stop Control
10-33